Recently, in the Aunt WeChat group, we have seen more originality of the group's friends, especially the high-yield molecular rudder, Bi Xiaobi and Wuli Baby's various types of original are bibiubiu. In order to follow their footsteps, they also hold the next one. The moon is going on foot, so it has successfully lost some things, so I have this.
A few days ago I saw that my aunt was pushing a thing and she immediately bought it. When I bought it, I didn’t think about it and bought it. It may be a disease..........
But don’t talk about this first. Take home inventory first.
Well, I know someone is going to say hello, but I still have to be proud to say that I am a mobile phone shell controller. Since the beginning of the 4th, I’ve been using three mobile phone shells, so that the fruit 4 is now viewed from outside is basically new. Same, but I can't find the phone case.
Since then, it has been used is the three anti-type mobile phone shell, every time you go out to see other people have to ask, "What is this cell phone you?", "Apple? Then you this mobile phone shell is too strong, it will not break it Do you want to fall to see?"
1, i-Blason mobile phone shell
The upper mobile phone case is a mobile phone case shell, covered with a transparent film, to prevent water splashes and scratches on the screen
The back of the lower mobile phone shell is all rigid on the back, and the part wrapped around with the mobile phone is soft rubber, and the four corners have a protruding anti-drop buffer design; the left side is designed with a volume key and a mute key switch, and the mute key switch is open, and the right side There is only one lock screen key; the bottom is the half-open cover of the charging interface and the headphone jack, and the speaker part has six holes to ensure the sound can be transmitted smoothly; and the back side is opened at the camera lens position, which provides the convenience of photography.
But at the same time it means that this phone case is just a shatterproof shell and is not waterproof at all.
2, Supcase mobile phone shell
After changing the 6SP, I thought that the i-Blason's mobile phone shell, although it was really in the drop-proof, had a good protection of the mobile phone in several drops of the mobile phone, but it did not have a lanyard hole, so it was not always when going outdoors. So convenient, so I wanted to buy a shell with a hang buckle (in fact, I did not figure out why there is a hang buckle), there is a SupcaseBelt Clip Holster mobile phone shell, and it and my original shell looks a bit Like.
This protective shell is also divided into two separate design, the upper layer is only a layer of screen plus screen film, but the material is significantly worse than i-Blason's, pinch it is not strong, feel too much force to cut off the border; And the border screen film is not easy to use, so that the first day I removed the shell screen film.
Then is the lower mobile phone shell, in addition to the same with i-Blason, the back is a hard shell, the four sides are soft shells, the lens position is also open type, the goods in several key positions is not even sealed! ! ! ! , what do not say gray, if accidentally fell into the water when outdoors, is really no room for salvation, do not understand how the manufacturers are designed!
Then the phone case is back buckled, but this back clip is too big, and the same as the entire mobile phone shell, to hang this on the backpack or waistband I still have to take great courage Caixing . Look at the design of the buckle, relatively speaking, the size of the buckle is still very large, but first the buckle is not rotating, can only be straight so vertical, second you can look carefully bayonet part, it is really folder It's just a matter of style. Whether it's in a backpack or a waistband, if you force it, it will come straight out. Although this happens less often, it's still a design flaw, so I decided to change it.
3, GriffinTechnology three anti-mobile phone shell
This should be the most satisfactory mobile phone shell I have used so far, and the fruit is a series of four, first on an exploded view
Griffin's mobile phone case is divided into four parts, the top layer is still composed of a hard shell frame and screen film, the hardness of the frame is not the best of the three, and i-Blason's hardness is almost the same, the screen film is also Well, use will not affect the convenience of the operation.
The middle is a hard protective shell. My two fingers are a thin layer of foam pad. After the mobile phone is put into it, it can be fixed. The lens on the upper right is also treated with waterproofing with Alekike plate. The outer layer is glued with waterproof adhesive tape, and the maximum degree of normal use prevents the liquid from entering the phone case.
The outer layer is a silicone protective shell, the overall material is a silicone material, the four corners and the middle are made thicker and prominent design, increased the impact of the drop, while the three common parts have done an open version of the semi-hermetic design, unfortunately It is the headphone hole and speaker that are not fully sealed or conceded in consideration of daily use.
Griffin is equipped with a back buckle. This buckle is much smaller than the previous Supcase, but the overall feeling is better after the card is on the phone, and the stability is very good. The whole phone case will not be thicker.
Besides, the design of the bayonet mouth can also be seen directly on the map. The Griffin buckle has a button-type design on the bayonet. When opening, it needs to be forced outwards to open it. This prevents the possibility that the mobile phone shell will fly out of the accident. At the same time, the buckle can be rotated 90° horizontally to a right angle, and occasionally it can be used as a stand to see a video.
Griffin's shell has been used for more than two years and was then attracted by the UAG shell brushed out by his aunt.
4, UAG mobile phone shell
To be honest, I was attracted by this white, followed by it and the back of the first three shells are also very similar to wood, and then its packaging is very simple to say, just a layer of plastic packaging, back package clearly Landmarked product characteristics.
The phone case feels very comfortable, and the white is also scratching. It should be easy to dirty in the future. The UAG in the middle has made a silver gilding, but I don't quite understand the purpose of the two holes in the middle is the flaw; the inner layer is textured. The right side is the switch button, the left is the volume button, and the mute button is exposed, all interfaces at the bottom are also open. When the phone is put in, it still has to be non-pointing. It is not so easy to put in, and it is light and very light.
Of course, I just bought the shell, but I don't know how to prevent it from falling, but there should be no problem with its brand reputation, and the key point is that the face value is much higher than the previous few, and the next month should be able to come back on foot. In the group and everyone to share it is not a drop it ~
Finally, I wish you all the National Day HAPPY!
Wuxi Doton Power , https://www.dotonpower.com