Air-to-energy water heaters have difficulty reaching sales threshold or promote industry consolidation

Yesterday, the reporter learned from the Energy Saving Products Huimin Engineering Exchange Conference held by the China Heat Pump Industry Alliance that the second batch of air energy heater subsidy application has been started. It is expected that about 50 enterprises will apply to the Development and Reform Commission and other departments. However, as the air-energy water heater industry is a new industry, many companies are more difficult to achieve the "annual promotion of no less than 10,000 units (sets)" threshold requirements, the industry companies to integrate, apply for a joint application or a way out.

Not Entering the Enterprise "Dilemma"

In the “Energy Conservation Products Huimin Engineering Energy-efficient Air Source Heat Pump Water Heater (Machine) Promotion Catalogue” formally issued by the National Development and Reform Commission, there are 31 first-listed companies, among which are Yimei, Gree, and Zhigao. The company’s 15 comprehensive home appliance brands also have 16 professional brands such as Tongyi, Nuentai, and Zhongguang Outes. Air-energy water heaters have become the “star” of the energy-saving products Huimin project with a maximum subsidy of 600 yuan in this round of stimulus policies.

But this is not all companies that enjoy subsidies for air energy. According to Song Zhongkui, executive deputy secretary-general of the China Energy Conservation Association, the second batch of enterprises’ application has been started. Huimin project shortlisted assessment work will be applied at any time, local government auditing recommendation, and occasional evaluation system, and the qualified air energy water heaters should be tightened. The relevant department submitted a report.

Zhao Misheng, the chairman of Guangdong's domestic leading company, Guangdong New Entai New Energy, pointed out to reporters of this newspaper that if you want to be shortlisted, you will be faced with an annual promotion requirement of no less than 10,000 units (sets). The taxation and process of the company must be regulated, and many companies feel that they are in a dilemma. "The annual sales of 10,000 units of commitments, accurate corporate information, real promotion network, and inspection reports are all small in the declaration process." Zhao Misheng reminded.

Zhao Misheng suggested that companies in the industry can jointly submit applications through integrated methods such as OEM and brand licensing, and improve the company's internal management to jointly expand the air energy industry.

Follow-up is expected to receive long-term subsidies

Tong Yikui, the founder of Tongyi Air Energy, pointed out that after the national energy-saving products Huimin subsidy project was approved, “the enterprise needs no more efforts to recommend it to consumers when it is promoted in the terminal, and a simple 'energy-saving electric appliance that is most encouraged by the state’s finances’ can be used. Explain everything."

However, compared with Australia, Japan, and other countries, China’s air-conditioning water heaters have given them a few thousand yuan in subsidy, and Tang Jiekui believes that the current subsidy of 300 yuan to 600 yuan is still insufficient, suggesting that relevant departments can consider “contributions to the product life cycle. "Energy savings" as a basis for subsidies, and improve the evaluation program of energy efficiency rating.

In addition, Zhao Hengyi, deputy secretary-general of the China Heat Pump Industry Alliance, disclosed that the relevant materials for the integration of air energy water heaters into “renewable energy sources” have been submitted to relevant departments of the State Council. Although specific operations must wait, the possibility of long-term subsidy in the later period is very high. big.

The air energy water heater absorbs the low-temperature thermal energy in the air through the refrigerant, and after being compressed by the compressor, converts it into high-temperature heat energy and heats the water temperature. This product, known as the "fourth-generation water heater," is highly energy-efficient and its energy efficiency is four times that of an electric water heater.

PLCC Connector

Antenk PLCC connectors Series Sockets are low profile, thin wall sockets designed to convert plastic leaded chips to a thru-hole PCB format on a .100" centerline grid.Antenk's superior precision stamped contact design provides consistent, high retention contacts for all size chips.

PLCC Connector

PLCC Connectors -PLCCSockets
A PLCC socket is a component that connects a chip carrier to an electronic circuit via surface-mounting or through-hole technology.
Plastic leaded chip carriers (PLCCs) are used in surface-mount technology where electronic circuits are produced, and components need to be mounted or placed directly onto a printed circuit board (PCB). The chip carrier is placed in a PLCC socket, which is either surface-mounted or features through-hole technology. A specialised tool called a PLCC extractor is needed to remove the chip carrier from the PLCC socket.

What are PLCC sockets used for?
PLCC sockets are used in surface-mount device (SMD) and surface-mount technology (SMT) applications. PLCC sockets made of heavy gauge copper alloy are compatible in high shock / high vibration applications. PLCC sockets made of rolled-leaf copper are useful in low-cost computer applications.

Types of PLCC sockets
The two primary categories of PLCC sockets are:
Surface-mount PLCC sockets, which are used in devices sensitive to heat from the reflow process. These allow for component replacement without redesigning or reworking the entire PCB.
1.27mm Pitch Female PLCC Socket, 44 Way SMT, Tin over Nickel Plated Contacts 1A
Through-hole technology PLCC sockets are necessary when a device requires stand-alone programming with flash drives or memory devices. These are also beneficial for prototyping activities where wire wrapping is required.
1.27mm Pitch Female PLCC Socket, 44 Way, Through Hole, Tin over Nickel Plated Contacts 1A

Plcc Socket,Plcc Connector,Plcc Socket Connector,Smd Plcc Connector,PLCC Connector DIP,PLCC Connector SMT

ShenZhen Antenk Electronics Co,Ltd , https://www.antenksocket.com