Design scheme of electronic power steering device based on Infineon
Infineon has more than 10 years of experience in this application, and provides a full set of ICs, from steering sensors to microcontrollers, from bridge drivers to world-class MOSFETs
EPS improves fuel efficiency by 3% while improving car handling and driving experience
These EPS systems integrate small designs and lower installation costs and the ability to adapt the software to various cars
EPS is the basic system for advanced driver assistance systems, such as crosswind compensation, lane assistance and parking assistance 
Block diagram of electronic power steering
Recommended Products
product | Explanation |
XC23xx | Powerful 16 / 32-bit microcontroller series with dedicated security features |
XC8xx | 8-bit microcontroller system with dual-cycle 8051 core |
XC88x | 8-bit microcontroller series with CORDIC unit |
TLE 718x | 3-phase bridge driver IC series |
IBP1x0Nxx | OptiMOS â„¢ -T 40V N-channel MOSFET series optimized for EPS applications |
TLE 499x | Linear Hall sensor series for torque and current sensing |
TLE 501x | IGMR sensor series for angle and rotor position sensing |
LVLP series Linear Power Supplies are DC Power Supplies that achieve AC/DC conversion through power frequency transformers and transistor loop control. Compared with switching DC power supplies, linear mode power supplies have higher stability, higher accuracy, and lower output ripple. And the most important, because of the use of the power frequency AC/DC conversion principle, the linear power supply does not have high-frequency radiation interference, and is especially suitable for use in places with restrictions on EMC and EMI.
The LVLP series linear AC - DC power supplies have a wide range of output specifications, the output power ranges from 1KW to 400KW, and the output voltage can reach up to 800VDC, and accept customization.
The whole series DC linear power supply adopts industrial-grade metal chassis, pure copper AC/DC varnished transformer, high-reliability multi-transistor filter loop, ensuring the power supplies can run for a long time at full load with high stability, high accuracy, and ultra-low ripple electronic characteristics, equipped with a complete protection circuit, which can better ensure the reliability of the linear power supply itself and the safety of the customer's load.
The output voltage and current can be adjusted by the 10-turn potentiometer with scale and lock on the front, equipped with 4 1/2-digit high-resolution LED meters for output value reading, and RS communication interface can also be added for remote control and monitoring of linear power supplies.
This series of linear power supplies are mainly used for aging and testing of components such as capacitors, relays, and resistors, and can also be used for experimental testing of electronic components such as thermistors and motors. At present, many well-known capacitor manufacturers, resistor factories and other electronic component production units and scientific colleges and universities and other research and development units use this series of power supplies, and they have all been highly praised.
Linear DC Power Supplies, Linear AC - DC Power Supplies, DC Linear Power Supplies, AC - DC Linear Power Supplies, Linear AC DC Supplies
Yangzhou IdealTek Electronics Co., Ltd. , https://www.idealtekpower.com