The voice is turbid and reduced by 60Hz~80Hz.
The bass pressure is reduced by 125Hz.
The midrange is too thick and reduces 400Hz~500Hz.
The intermediate frequency hits the ear minus 1250Hz~2000Hz.
The vocal is too prominent to reduce 3K,
High frequency harshness is reduced by 4~6K,
Tooth is too heavy to lose 8K,
The high-pitched hair is reduced by 12K to 4k~8K.
The sense of space is not enough plus 12K ~ 16K.
The bass is too hard to reduce 160Hz ~ 200Hz,
The male voice is reduced by 200Hz.
Nasal tone reduction 250Hz
The equalizer uses attenuation as much as possible, in turn:
The low frequency is not full and 60Hz ~ 80Hz,
Insufficient strength plus 125Hz,
The vocals are thin and add 200Hz~400Hz.
The sound is imaginary plus 1K nearby,
After the vocal position is off, mention 3K,
The sound is not bright, nowhere, don't use lifting, and reduce the extra things, the natural level is clear.
If you really feel that something is missing, it is usually caused by the indoor environment or the speaker position.
Will change the sound floor of the speaker, but destroy the sound quality. Remember, sound reinforcement is art, all art is
Defects can't be perfect.
GEQ should use attenuation as much as possible, do not use boost; and: the maximum attenuation should not exceed the fader
Half of the trip.
The voice is turbid and reduced by 60Hz~80Hz.
The bass pressure is reduced by 125Hz.
The midrange is too thick and reduces 400Hz~500Hz.
The intermediate frequency hits the ear minus 1250Hz~2000Hz.
The vocal is too prominent to reduce 3K,
High frequency harshness is reduced by 4~6K,
Tooth is too heavy to lose 8K,
The high-pitched hair is reduced by 12K to 4k~8K.
The sense of space is not enough plus 12K ~ 16K.
The bass is too hard to reduce 160Hz ~ 200Hz,
The male voice is reduced by 200Hz.
Nasal tone reduction 250Hz
The equalizer uses attenuation as much as possible, in turn:
The low frequency is not full and 60Hz ~ 80Hz,
Insufficient strength plus 125Hz,
The vocals are thin and add 200Hz~400Hz.
The sound is imaginary plus 1K nearby,
After the vocal position is off, mention 3K,
The sound is not bright, nowhere, don't use lifting, and reduce the extra things, the natural level is clear.
If you really feel that something is missing, it is usually caused by the indoor environment or the speaker position.
Will change the sound floor of the speaker, but destroy the sound quality. Remember, sound reinforcement is art, all art is
Defects can't be perfect.
GEQ should use attenuation as much as possible, do not use boost; and: the maximum attenuation should not exceed the fader
Half of the trip.
The voice is turbid and reduced by 60Hz~80Hz.
The bass pressure is reduced by 125Hz.
The midrange is too thick and reduces 400Hz~500Hz.
The intermediate frequency hits the ear minus 1250Hz~2000Hz.
The vocal is too prominent to reduce 3K,
High frequency harshness is reduced by 4~6K,
Tooth is too heavy to lose 8K,
The high-pitched hair is reduced by 12K to 4k~8K.
The sense of space is not enough plus 12K ~ 16K.
The bass is too hard to reduce 160Hz ~ 200Hz,
The male voice is reduced by 200Hz.
Nasal tone reduction 250Hz
The equalizer uses attenuation as much as possible, in turn:
The low frequency is not full and 60Hz ~ 80Hz,
Insufficient strength plus 125Hz,
The vocals are thin and add 200Hz~400Hz.
The sound is imaginary plus 1K nearby,
After the vocal position is off, mention 3K,
The sound is not bright, nowhere, don't use lifting, and reduce the extra things, the natural level is clear.
If you really feel that something is missing, it is usually caused by the indoor environment or the speaker position.
Will change the sound floor of the speaker, but destroy the sound quality. Remember, sound reinforcement is art, all art is
Defects can't be perfect.
GEQ should use attenuation as much as possible, do not use boost; and: the maximum attenuation should not exceed the fader
Half of the trip.
The bass pressure is reduced by 125Hz.
The midrange is too thick and reduces 400Hz~500Hz.
The intermediate frequency hits the ear minus 1250Hz~2000Hz.
The vocal is too prominent to reduce 3K,
High frequency harshness is reduced by 4~6K,
Tooth is too heavy to lose 8K,
The high-pitched hair is reduced by 12K to 4k~8K.
The sense of space is not enough plus 12K ~ 16K.
The bass is too hard to reduce 160Hz ~ 200Hz,
The male voice is reduced by 200Hz.
Nasal tone reduction 250Hz
The equalizer uses attenuation as much as possible, in turn:
The low frequency is not full and 60Hz ~ 80Hz,
Insufficient strength plus 125Hz,
The vocals are thin and add 200Hz~400Hz.
The sound is imaginary plus 1K nearby,
After the vocal position is off, mention 3K,
The sound is not bright, nowhere, don't use lifting, and reduce the extra things, the natural level is clear.
If you really feel that something is missing, it is usually caused by the indoor environment or the speaker position.
Will change the sound floor of the speaker, but destroy the sound quality. Remember, sound reinforcement is art, all art is
Defects can't be perfect.
GEQ should use attenuation as much as possible, do not use boost; and: the maximum attenuation should not exceed the fader
Half of the trip.
The voice is turbid and reduced by 60Hz~80Hz.
The bass pressure is reduced by 125Hz.
The midrange is too thick and reduces 400Hz~500Hz.
The intermediate frequency hits the ear minus 1250Hz~2000Hz.
The vocal is too prominent to reduce 3K,
High frequency harshness is reduced by 4~6K,
Tooth is too heavy to lose 8K,
The high-pitched hair is reduced by 12K to 4k~8K.
The sense of space is not enough plus 12K ~ 16K.
The bass is too hard to reduce 160Hz ~ 200Hz,
The male voice is reduced by 200Hz.
Nasal tone reduction 250Hz
The equalizer uses attenuation as much as possible, in turn:
The low frequency is not full and 60Hz ~ 80Hz,
Insufficient strength plus 125Hz,
The vocals are thin and add 200Hz~400Hz.
The sound is imaginary plus 1K nearby,
After the vocal position is off, mention 3K,
The sound is not bright, nowhere, don't use lifting, and reduce the extra things, the natural level is clear.
If you really feel that something is missing, it is usually caused by the indoor environment or the speaker position.
Will change the sound floor of the speaker, but destroy the sound quality. Remember, sound reinforcement is art, all art is
Defects can't be perfect.
GEQ should use attenuation as much as possible, do not use boost; and: the maximum attenuation should not exceed the fader
Half of the trip.
The voice is turbid and reduced by 60Hz~80Hz.
The bass pressure is reduced by 125Hz.
The midrange is too thick and reduces 400Hz~500Hz.
The intermediate frequency hits the ear minus 1250Hz~2000Hz.
The vocal is too prominent to reduce 3K,
High frequency harshness is reduced by 4~6K,
Tooth is too heavy to lose 8K,
The high-pitched hair is reduced by 12K to 4k~8K.
The sense of space is not enough plus 12K ~ 16K.
The bass is too hard to reduce 160Hz ~ 200Hz,
The male voice is reduced by 200Hz.
Nasal tone reduction 250Hz
The equalizer uses attenuation as much as possible, in turn:
The low frequency is not full and 60Hz ~ 80Hz,
Insufficient strength plus 125Hz,
The vocals are thin and add 200Hz~400Hz.
The sound is imaginary plus 1K nearby,
After the vocal position is off, mention 3K,
The sound is not bright, nowhere, don't use lifting, and reduce the extra things, the natural level is clear.
If you really feel that something is missing, it is usually caused by the indoor environment or the speaker position.
Will change the sound floor of the speaker, but destroy the sound quality. Remember, sound reinforcement is art, all art is
Defects can't be perfect.
GEQ should use attenuation as much as possible, do not use boost; and: the maximum attenuation should not exceed the fader
Half of the trip.
Wood Tea Tray,Plastic Fruit Tray,Dry Fruit Tray,Hotel Serving Tray
Yuefeng Display Product Co., Ltd. , http://www.mw-acrylicdisplay.com