Straight Couper/HDPE Micro Duct Connector 12/10mm

  • Model NO.: str
  • Structure: ST
  • Ferrule Endface: APC
  • Fabrication Process: Moulded
  • Light Source TYPE: Laser
  • Brand: Blqd
  • Trademark: blqd
  • Specification: International Standard
  • HS Code: 39174000
  • Transmission Medium: Multimode
  • Number of Cores: Multi-Core
  • Shape: Circular
  • Application: Network Equipment
  • Connector Type: SC-PC
  • 3~16mm: Red Color
  • Transport Package: Plastic Bag+Small Box+Big Cardboard Box
  • Origin: China
Straight Couper/HDPE Micro Duct Connector 12/10mm

We are the professional manufacturer for plastic fittings for many years.
And our products are good qulaity.
The Specification including from 3mm to 16mm.

This series of fittings is made of plastic which is widely used in pneumatic system, optical fiber.

Technique information:
Medium: Air and Water
Working Pressure: 0~150PSI
Working Temperature: 0-60°
Air tube connected: Nylon and Polyurethane


Product Description
The Micro Duct Connectors make splicing MicroDuct fast and easy. Simply push the Micro Ducts into the center of the coupling. No tools are required. The coupler can be connected and disconnected 10 times and still maintain the high performance requirements for air blown installation systems.

Push-Fit Micro Duct connector operate at 15 BAR (218 psi) with a maximum permissible leakage rate of 1cc/min. This is equivalent to 1 bubble every 3 seconds. Higher pressures have been used in the field with no increase in leakage rate. Quick Burst rating is 25 BARS (363 psi).

Micro Duct Connector Feature:

Body Material:
PC, impact resistant

Collect Material:
POM, stainless steel teeth

O-rings Material:
Nitrile rubber

Blowing Pressure:
16 bar

Burst Pressure:
25 bar

Temperature Range:
-10 ~ 60°C

Insertion force:
50N max (5kg)

Specification:

We have 5-3mm,5-4mm,7-3mm,7-4mm, 7-5mm,8-3mm,8-5mm,8-7mm,10-5mm, 10-7mm, 10-8mm, 12-7mm,12-10mm, 12-8mm, 12.7-10mm, 8.5-7mm, 14-10mm,14-10mm,14-12mm,16-10mm,16-12mm,sizes in stock.   

Ethernet Slip Ring

Ethernet Slip Ring is a device that allows Ethernet signals to be transmitted through a rotating assembly. This device is typically used in applications where it is not possible or practical to run Ethernet cables, such as in an application where the cables would have to travel through a hazardous area. It converts the regular Ethernet signals into rotary signals, which are then transmitted through the rotating assembly.


There is a growing trend in the industry for Ethernet slip rings. Ethernet slip rings are currently being used to interconnect computer networks. A slip ring is a transmission device that uses a counter-rotating encircling belt to transfer power and data between two or more devices.


Senripgrid Conductive Slip Ring has the following characteristics Direct unplugging of the RJ45 connector Upon reaching eight simultaneous ports, follow the standard cable connection method Work with either copper or gas-liquor joints Transmission to the external network (10M, 100M, 1Km Base T).



Ethernet Slip Ring,Generator Collector Rings,Through Bore Rotary Union,Rotary Pressure Joint

Dongguan Oubaibo Technology Co., Ltd. , https://www.sliprob.com