Model NO.: FH-S022
IP Rating: IP65
Certification: CCC, CE, CQC, SASO
Input Voltage: 220V
LED Chips Brand: Epistar
Welding Standard: Aws D1.1
Galvanized Standard: ASTM123
Warranty(Year): 20
Wind Resistance: 160km/H
Trademark: Feihuang
Transport Package: Plastic Bubble Paper
Specification: 15m 20m 25m 30m 35m 40m 50m
Origin: China
HS Code: 730890000
The number of floodlights is variable depending on the size of the area to be illuminated and intensity of the light, which is determined as a result of the Lighting calculation to be given by the customer with the pole length. Common features of these poles are that the most upper body of the where the floodlight is to be installed should be inclined to the Lighting direction with a certain angle, and there should be a frame system on which a working platform and floodlights are to be fixed. In addition, our Poles can provide technical support to the customers for the lighting calculation.
Stadium Lighting poles can be manufactured at any size, and or the manufacturing is carried out by joining more than one steel body of polygonal section up to 50 m height using the slip-joint method.
Our pole types, which are developed in accordance with customer requirements as well as our special designs, which are well-accepted throughout the world, are mainly as follows depending on the climbing system;
Stadium Lighting poles with caged ladders,
Stadium Lighting poles with internal ladders,
Stadium Lighting poles with man power lift.
The most important feature that distinguishes the poles from each other is the climbing system. In poles with caged ladder, there are safety steel bar rings which provide safety during climbing. In the internal ladder system, safety systems based on the customer's requirements can be installed.
Â
| Height | From 20 m to 50 m |
| Suit for | Airport ,seaport , plaza, stadium , square ,highway, street way  etc |
| Shape | Conoid ,Multi-pyramidal , Columniform,polygonal or conical |
| Material | Usually   Q345B/A572,minimum yield strength>=345n/mm2                Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- |
| Tolerance of dimension | +- 2% |
| Power | 400Â Â W- 5000 W |
| Light panel | Various figure of selection ,material with hot dip galvanization steel frame ,stainless steel ,special aluminum plate |
| Light Extension | Up to 30 000Â |
| Lamp &Luminaire | Projector generally to be applied with safety grade IP65 Luminaire with high pressure sodium lamp of long lift and high lighting efficiency ,or metal halide lamp with high CRI |
| Lifting system | Lifter fixed in the inner of the pole with lifting speed of 3~5 meter per minute Equipped electromagnetism brake and break -proof device, manual operation applied under power cut |
| Electric appliance control device | Electric appliance box to be the holder of the pole ,lifting operation could be 5Â meter away from the pole through wire Time control and light control could be equipped to realize full-load lighting mode and part lighting mode |
| Surface treatment | Hot dip galvanized Following ASTM AÂ 123, color polyester power or any other standard by client required. |
| Joint of Poles | Insert mode,innerflange mode,face to face joint mode . |
| Design of pole | Against earthquake of 8Â grade |
| Wind Speed | 160 Km/Hour |
| Minimum yield strength | 355 mpa |
| Minimum ultimate tensile strength | 490 mpa |
| Max ultimate tensile strength | 620 mpa |
| Standard | ISO 9001 |
| Length of per section | Within 14m once forming without slip joint |
| Welding | We have past flaw testing. Internal and external double welding makes the welding beautiful in shape Welding Standard :AWS (Â American Welding Society )Â D 1.1 |
| Thickness | 1 mm to 30 mm |
| Production Process | Raw material test → Cutting →Molding or bending →Welding (longitudinal )→Dimension verify →Flange welding →Hole drilling →Calibration → Deburr →Galvanization or powder coating ,painting →Recalibration →Thread →Packages |
| Packages | Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required , each 40HC or OT can loading how many pcs will calculation base on the client actually specification and data.  |
Fenghua Jade Motor Co., Ltd. , http://www.telephone-enclosure.com