I still remember that day's encounter with it. It was the first mechanical keyboard in my life. In a double-eleven on the low-key, earthy principle, an ikbc c104, an axe, gray, No light.
The mechanical keyboard did give me a different feeling, so the old man said something. . In my life, I spent only a few hours playing computer at home, and more of it was coded in the office code. So last year's Double Eleven entered a domestic machine, the Black Knight ak33, the blue axis flame alloy version, is the following This goods.
This keyboard is actually very appetizing to me, black and red, portable, mini, of course, because of the cheap, afraid that they can not adapt to the blue axis do not want to waste. .
The meticulous audience spectator may have discovered that this keyboard is similar to the one in the picture. . So today our protagonist is the ace of the Black Lord. Time passes. . This year's double 11 was just over and I suddenly discovered that the office had a lot of mechanical keyboards. The brightest was someone's cherry 8.0rgb, so the teenager's heart began to stir. . After reading a reel article issued by a big brother in the aunt, the reconstruction of the ak33 began.
Unplug the keycap
Unprecedented rush. . Then there was the idea of ​​getting colored when changing the axis. . So first buy the tin suction device (the soldering iron was used to weld the earphones before, and the tin suction device is said to be less, especially the remnants of hand like me). Screw a screw. . Remove the plastic back cover and start removing the shaft
The first time the axis was removed was hard. . First of all, this keyboard has lights. . The lamp is not very easy to dismantle. It has been studied for a long time, and it has found a bit of a feeling. First of all, it is inserted into the lamp. It is the feeling of turning the lamp out, of course, it is not really embarrassing. Then the two solder joints are heated simultaneously with the iron of the cutter head. The dice came out a little harder. In this process, the keyboard is best to stand up, and then heat up more, the board can still withstand the toss, and then the tin actually left behind does not have to deal with, leaving more but convenient to the back Re-install the lamp, and then the first axis was used for a long time before it was removed. The main reason is that the tin suctioner will not be used. It is necessary to heat enough on the solder joint, and then put the tin absorber on the whole, and the speed is fast. Must watch video science. .
Then, in the salted fish, a piece of Kingston's board was scouted, the red shaft was 104 keys, and the shaft was very new, 88 pieces. . I don't know if it's worth the price. . Anyway, this board is better than me, the tin melting point is relatively low, blindly follow the wind into the red shaft. . 
Then it was demolishing the demolition, the way to spray a paint, Tamiya's model paint, ship red, is said to cover the background, so there is no primer, bought a bottle of extinction protection paint, a bottle of shiny protective paint. . Prepare the aluminum plate for matting, and let the plastic cover underneath make him shine. . First spray paint. . Sure enough, it was a mess. First of all, individuals felt that tinkering was a taboo for novices. They may not be able to make up for it, nor would they understand. . Began to fear the waste is also particularly near. . All these have led to unsatisfactory spray painting results. .
The final result is still better than here. . But still don't want to post it. . ugly
I was busy for two nights. . In the end, I really didn't want to engage in it. .
Solder the shaft. . In the middle of a continuous computer test, the lamp is then added. When the lamp is turned on, the lamp is inserted and the tin left before is heated. The lamp is inserted. If there is enough tin left, there is no need to add tin. The process here is the fastest. .
The final product. . What does it seem to be different from what it was before? . Hey. .
Then try it. . There is nothing wrong with this article. It is the code word. . Then I found out that the old e key did not come out, and the number key had no light. It was obviously good before. . then. . The full-light mode is as follows:
Pit father ah. . How can a single mode become this way? . It was only after they were installed that there was one less pad. . Well continue to disassemble, at least to solve the first two issues.
5G Parabolic Dish Antenna,4G Parabolic Dish Antenna,Base Station Dish Antenna,Parabolic Dish Antenna
Yetnorson Antenna Co., Ltd. , https://www.yetnorson.com