Solar LED light bottle is more than one wonderful (Photos)

It looks like a sports bottle. In fact, he is an LED camping light. If you have important personal items when you travel, you can also put them in, waterproof and moisture-proof. This light is called LightCap300LED outdoor light. The LED light is hidden inside the bottle cap. The outside of the cap is covered with a whole solar panel. No matter where you are, you can charge it in the wild, and it will continue to illuminate at night. It is a good solar energy. LED lights are also excellent outdoor equipment. The excellent sealing makes you worry about the digital products such as mobile phones and cameras, and enjoy the fun of camping when you are wading in the mountains.

Solar LED light

Solar LED light

Solar LED light

Solar LED light

Standard PCB or A PC board ( PCB or printed circuit board) is at the heart of virtually every electrical device. As the PC board manufacturer in Shenzhen China, we are firmly committed to the highest possible levels of quality and innovation in all of our PCB Fabrication processes to ensure that each and every circuit board that leaves our facility is ready to exceed expectations. All PCB boards would be tested well before shipping.

ZhongFeng has been a PC board manufacturer for the past 15 years and specializes in working side-by-side with visionary engineers and buyers in the High Frequency RF/Microwave, Audio, Defense and Medical industries (among others) to create solutions for ever-advancing printed circuit board concepts and designs.

 

The copper is the circuits material and the circuits designed by the PCB designers. Depends on the current in the circuits, the PCB copper thickness could be done with 0.5oz-10oz. But the PCB designers need be noted that the copper track width/space need be enlarged with the thickness. For example, the minimum copper track width/space could be 3mil/3mil with 0.5oz, but would be 4mil/4mil with 1oz.

 

The PCB board could be rigid PCB, could be flex PCB and also could be Flex-Rigid PCB . And the materials could be FR4, PI, Aluminum, Copper-based, Rogers, Teflon, etc. They have different applications. For example, FR4 PCB is the most commonly used for rigid PCB and almost good for all electronics products; PI is the most commonly used for flex PCB; Aluminum and copper-based have good thermal diffusivity and always used for LED PCB ; Rogers PCB and Teflon PCB are always used for High Frequency PCB, etc.

 

PCB Manufacture Capabilities

 

Features 

 Capabilities

Layers

1-36 layers

Material

 FR-4, Aluminum, Copper, Polyimide, high frequency (Rogers, PTEE, PI), etc.

PCB Type

FR-4 Standard PCB, Aluminum PCB , Copper-based PCB, HDI PCB , Rigid-Flex PCB, Flex PCB, Thick Copper PCB and Rogers PCB, etc.

Board Thickness

0.1mm-6.0mm

Copper Thickness

1/2oz-6oz(18um-210um)

Biggest Board size

600mm*1200mm

Min Tracing/Spacing

0.075mm/0.075mm (3mil/3mil)

Min drilling Hole diameter

0.15mm(6mil), 0.1mm(4mil)-laser drill

Solder Mask

Green, Black, White, Red, Yellow, Blue and Purple, etc.

Silkscreen color

White, Blue, Black, Red, Yellow

Surface finish

HASL Lead free, Immersion Gold (ENIG), Immersion Tin, Immersion Silver, OSP, Carbon oil, etc.

Special Techniques

Impedance Control, Gold Fingers, Blind/Buried vias, Peelable solder mask, Half holes, Via-in-Pad and Countersink hole, etc.


PCB Products Show


PCB Boards


PCB Factory Show


Yifang PCB Factory



Standard PCB

Standard PCB,PCB Services,PCB Array,PCB Production

ZhongFeng Electronic Technology Co., Limited , http://www.dopcba.com